Services

We provide various measurement, analysis, calibration and testing services. We also provide measurements and analyses that are more sophisticated than routine ones, approaching research investigation level. We offer consultations and training. For more detailed information on the accredited methods please contact the relevant experts (contact data on our contact page).

 LaboratoryServiceAccreditedPrice (01.01.2025)
Excluding VAT 22%


Laboratory
of Metrology in Chemistry 

More information:
Services of Laboratory of Metrology in Chemistry
Calibration of anemometersYesAccording to the number of calibration points
Calibration of relative humidity hygrometers
Yes

CIPM MRA calibration and measurement capabilities
According to the number of calibration points
Calibration of air thermometersYesAccording to the number of calibration points
Calibration of differential manometersYesAccording to the number of calibration points
Calibration of electronic non- automatic weighing instrumentsYesAccording to the number of calibration points


Laboratory
of Work Environment

More information: laboratory contact details on our contacts page).
Number of aerobic bacteria and viable moulds in air measured with IMPAKTOR sampler

Laboratory
of Nuclear Spectroscopy
More information:
Services of Laboratory of Nuclear Spectroscopy
Radiological analysis of water samples – Determination of indicative dose of water samples with an accredited measurement procedure “Gammaspectromterical Measurement of the Activity Concentrations of Radium Isotopes in Water+Yes (ground-, surface- and drinking water)235 EUR
Gammaspectrometric analysis of solid samples105 €


Laboratory
of Environmental Analysis
More information: laboratory contact details on our contacts page).
 
pHYes (effluent- and wastewater)3 €
Biochemical oxygen demand (BOD7)Yes (effluent- and wastewater)18 €
Total nitrogen (Ntot)Yes (effluent- and wastewater)20 €
Chemical oxygen demand (CODCrYes (effluent- and wastewater)22 €
Total phosphorus (Ptot)Yes (effluent- and wastewater)18 €
Suspended solidsYes (effluent- and wastewater)12 €
Determination of anions by ion chromatography (Cl, NO2, NO3, SO42-)15 €
NO2-N8 €
NO3-N10 €
NH4-N9 €
dry solids, loss of ignition, organic matter content8/15 €
Electrical conductivity 3 €
Alkalinity9 €
Total iron12 €
Total hardness6 €
Ca2+, Mg2+6+1 €
Total organic carbon (TOC)20 €
Total nitrogen (Kjeldahl)18 €
Total nitrogen of solid sample (Kjeldahl)23 €
Total phosphorus of solid sample20 €
Chemical oxygen demand of solid sample23 €
Nitrification inhibition test300 €
Denitrification inhibition test300 €
Oxygen demand inhibition test160 €
Determination of waste water degradation280 €


Laboratory
of Space Technology


More information:
Environmental testing –
Services – testing

Optical radiometry –
Services – optical measurements

Expert service85 eur/hour
Environmental testing in thermal vacuum and climate chamberYes105 eur/24 h
Calibration of radiometric sensorsYes475 eur/pcs
Characterisation of radiometric sensors for non-linear response (measured during radiometric calibration with two integration times, in addition to the calibration price)110 eur/pcs
Characterisation of radiometric sensors for angular response250 eur/pcs
Characterisation of radiometric sensors for thermal response at 5 temperature points:
(+5, +10, +20, +30, +40) °C in the wavelength range from 350 nm to 950 nm
890 eur/pcs
Characterisation of radiometric sensors for straylight distribution function in the wavelength range from 350 nm to 950 nm713 eur/pcs
Characterisation of radiometric sensors for polarisation sensitivity from 0° to 360° rotation angle at 15° incremental steps in the wavelegth range from 350 nm to 950 nm216 eur/pcs
Transmittance of optical filters in the wavelength range from 300 nm to 900 nm in 1 nm steps.Yes160 eur/pcs
Calibration of FEL lamp in the wavalength range from 340 nm to 900 nmYes1100 eur/pcs

Shock testing
Shock test (1 axis)
(includes test preparation, two frequency response measurements on the shaker, one shock test, data processing and a testing certificate)

Each additional test
(includes two frequency response measurements and one shock test)
Note: If fixture preparation is required, an additional cost will apply.

Yes
550 eur/pcs





100 eur/pcs

Vibration testing
Vibration test (1 axis)
(includes test preparation, two frequency response measurements, one vibration test, data processing and a testing certificate)

Each additional test
(includes two frequency response measurements and one vibration test)
Note: If fixture preparation is required, an additional cost will apply.

Yes550 eur/pcs





100 eur/pcs
General terms and conditions of TCUT services
* Testing Centre of University of Tartu confirms that it conducts all its activities confidentially and impartially. During the accreditation of the TCUT, the employees of the Estonian Accreditation Centre (EAK) may see the client’s data, but the information is not subject to disclosure.
Accept Cookies